Frequently Asked Questions

A geothermal heat pump is one of the most energy-efficient ways to heat and cool your home, using the earth’s stable underground temperatures to reduce energy costs by 30% to 60% on heating and up to 50% on cooling. While the upfront cost ranges from $30,000 to $60,000, these systems pay for themselves in 5 to 10 years through lower utility bills and minimal maintenance. Best of all, you never have to pay for an OIL or GAS bill!

What is Geothermal Heat and Air Conditioning?

Geothermal is “earth heat” – the energy contained in the subsurface. Monarch drills wells into the ground to harvest the consistent subsurface temperature. We pump water down into the wells, then draw it back up to surface and run it through a modern heat pump. This process is used to heat and cool your home  year round.

Does Geothermal Work in New England?

YES! The modern heat pumps work year round in New England. Though it seems cold to us, geothermal uses the consistent temperatures deep below the surface.

Can I keep my Radiant  Floors?

Absolutely. Radiant and Geothermal are a match made in heaven.

My yard is tiny. Will Geothermal work for me?

Yes! You may be able to use an area as small as 10×10. Our drillers are really good!

How is my system designed?

Every Geothermal system is a custom design. Monarch uses proprietary software to appropriately size the heat pump and loops for your home. The software takes many factors into consideration including: the heating and cooling requirements of the home, loop type, depth, soil conditions, earth temperatures, outdoor air temperature extremes, local fuel rates and much more.

How is the Heat or AC Distributed in my house?

Heat can be brought into or removed from the home or building in two different ways. The most common method, especially for existing homes, is with forced air through a series of ductwork. In this case, a blower is used to pull air in and once heated or cooled, the air is pushed back into the structure through ductwork. The other method used to disperse heat powered by geothermal is called radiant heating. In this case, hot water flows through pipes under the floor of the structure. This allows the desired temperature to radiate throughout the room evenly, so it’s known as the most comfortable type of heating.

How long will my system Last?

There are two main components to a geothermal system. The ground loops, which are installed underground, have an indefinite lifespan (100 years plus). This part of the system should only need installed once. The second part of the system is the heat pump unit, which is installed indoors. The average lifespan of a geothermal unit is 25 years (many last beyond this), which makes its longevity superior to a traditional heating or cooling system that has an average lifespan of only 15 years. If a ground loop has already been installed, the indoor part of the system can usually be replaced with no more work or expense than a traditional system.

Does Geothermal work with Solar Panels?

YES! Geothermal is actually the best heating and cooling system to have if you’re interested in installing a PV solar system for your home or building. Since geothermal dramatically reduces the amount of electricity needed, your solar system should easily be able to heat and cool your whole home if sized correctly.

What makes Geothermal so cost effective?

The earth absorbs almost 50% of the sun’s solar energy and stores it below the surface. The ground loop powering a geothermal system uses that renewable energy to heat and cool homes. Traditional forms of heating and cooling like natural gas, propane, oil, air source, etc. do not use a renewable energy to operate, so they can never be as environmentally friendly.

Traditional HVAC systems that use fossil fuels cannot be as efficient as a geothermal system because they require combustion (flames) to operate and provide heat. Airsource and ductless systems are also not as efficient as geothermal because they are creating warm or cold air based on the outdoor temperatures, which can fall well below freezing or on the opposite end, get very hot. Geothermal is transferring heat from the moderate temperatures below ground as opposed to the varying conditions we feel outside.

Is Geothermal hard to maintain?

No. Geothermal systems are virtually maintenance free. When installed properly, the buried loop will last for generations. And the other half of the operation—the unit’s fan, compressor and pump—is housed indoors, protected from the harsh weather conditions. Usually, periodic checks and filter changes are the only required maintenance.

Can I finance a Geothermal project?

Yes! Monarch Geothermal is the leader in finance options for Geothermal

Will Geothermal Heat my Pool and Hot Tub?

Absolutely? Let us design a system that heats your toys effectively and efficiently! Geothermal is by far the most cost effective way to heat your pool.

My neighbor says his driveway is heated with Geothermal?

Let’s GO! Yes, you can use geothermal to provide enough heat so you never have to shovel again!

What Brands of Geothermal do you offer?

Sundial is a partner with Waterfurnace, Enertech, Geostar, Bosch, Climate Master, Dandelion and others. We offer only the top brands.

How does a geothermal heating & cooling system work?

While outdoor temperatures fluctuate with the changing seasons, underground temperatures don’t. Just a few feet below the earth’s surface, temperatures remain relatively constant year-round. A geothermal system, which typically consists of an indoor unit and a buried earth loop, capitalizes on these constant temperatures to provide “free” thermal energy. In winter, fluid circulating through the system’s earth loop absorbs stored heat and carries it indoors. The indoor unit compresses the heat to a higher temperature and distributes it throughout the home. In summer, the system reverses, pulling heat from the home, carrying it through the earth loop and depositing it in the cooler earth.

Geothermal heating and cooling systems are the most efficient and environmentally friendly systems on the market today. These systems work differently than conventional systems by taking advantage of the sun’s solar energy that is absorbed and stored by the earth. Once you are below the frost line the ground maintains a fairly constant temperature, approximately the average annual outside air temperature for the region. In most systems, a water solution circulates in pipes in the ground to carry thermal energy to the heat pump in the winter for heating and moves heat from the house into the ground in the summer. Since so much of this energy actually comes from the ground, geothermal systems use relatively little electricity to convert this energy to comfortable temperatures inside a building year round.

What makes a geothermal system different from ordinary systems?

A conventional heating system burns fossil fuels (e.g., natural gas, propane, oil, etc.) for space heating and a separate air conditioning system for cooling. Geothermal heating and cooling systems have one geothermal heat pump which both heats and cools leveraging the constant temperature of the ground to produce maximum efficiencies in both heating and cooling modes. So instead of burning fossil fuels to generate heat and expelling heat from the house in the summer into hot air outside, a geothermal system transfers heat to and from the earth to provide a more efficient, affordable and environmentally friendly method of heating and cooling your home. Typically, electric power is used only to operate the unit’s fan, compressor and pump.

How deep are the geothermal ground loops buried?

Horizontal closed loop systems in New England for example are buried in the ground 6 to 8 feet deep. This can be configured in a series of long relatively narrow trenches or a larger rectangular excavations with a network of loops similar to a pattern you might see for a radiant floor system.

Vertical closed loop systems are often hundreds of feet down – 200 to 450 feet are common for a single geothermal borehole. Larger homes and commercial buildings will have more than one vertical loop to ensure there is sufficient thermal exchange with the ground. Most single family homes typically have one or two boreholes, while a large commercial building might have over 100 boreholes, each borehole 400 feet deep on 20 foot centers (spacing), concealed under a large parking lot.

Do geothermal systems require much maintenance?

No. The geothermal parts of your heating and cooling system are virtually maintenance free. Most of the geothermal heat pumps we install are factory sealed refrigeration systems – very much like a kitchen refrigerator. When installed properly, the buried loop will last for generations simply circulating a water solution at low pressure. All the mechanical equipment is safe indoors, protected from weather conditions. Geothermal heat pumps typically switch from heating to cooling automatically and most only require an air filter to be changed a couple times a year. Many of our customers have one of our technicians come out once a year to check things over, while other customers do the routine maintenance themselves.

What’s the return on investment (ROI) generally?

Geothermal heat pump systems are recognized as the most efficient heating and cooling systems available, but they have a higher first cost (installation cost) than many other alternatives. For a typical single family home without access to natural gas, the additional cost to upgrade to a geothermal system will have returns on the 5% to 8% annually at today energy prices for propane and heating oil. So if the system cost $10K more to install, it would be like getting 5% to 8% return annually on a $10K investment – which is pretty good these days! For businesses the range is greater depending on your tax status and a number of other factors. The best returns are much higher.

Can geothermal systems provide hot water?

Yes! Many geothermal heat pumps include a desuperheater, which captures excess heat and uses it to preheat your water heater, reducing water heating costs by up to 50%. If you need year-round hot water savings, a full geothermal water heating system may be worth considering.

Can geothermal systems be installed in existing homes?

Yes, in some cases. Retrofitting a geothermal system can be more difficult than installing one in new construction. Geothermal requires ductwork to be retrofitted or installed. We cannot connect Geothermal to baseboards or radiators.

Can Geothermal be retrofitted to baseboards or radiators.

No. The temperature of Geothermal does not make it practical or wise to connect to radiators or baseboards.

How often should a Geothermal System furnace be serviced?

Homeowners should have their geothermal serviced at least once a year. This will help prolong the system’s life span and help to reduce repairs and utility costs.

What payment options do you have?

We provide financing! You can get the systems they need for an affordable cost.
How often should I change my heating and cooling system’s air filter?
Your home’s air filter should be changed routinely, typically every 30 to 60 days.

Are seasonal maintenance plans worth the investment?

Yes! Contact us today to discuss.

What is green HVAC?

Green energy HVAC focuses on reducing energy consumption and increasing the efficiency of existing HVAC systems in homes not set up for renewable energy options. Properly sized green installations reduce waste and increase output.

What is the most energy-efficient HVAC system?

Some of the most energy-efficient HVAC systems available now are geothermal heat pumps with solar.

How does HVAC efficiency affect sustainability?

High-efficiency HVAC systems use less energy than a standard HVAC system while providing the same (or better) output. This can save energy and money, and with regular tune-ups and maintenance, the life span of your system can increase. The longer a system is performing efficiently, the better impact we can have for sustainability.

Are there any discounts or payment options for green HVAC systems?

There are rebates and incentive programs for certain new system installations.

Is geothermal HVAC worth it?

Geothermal HVAC ends up being more affordable in the long run due to operational savings on utility bills, despite the up-front costs. And they’re more efficient than traditional central heating and cooling systems. There are also federal rebates and incentives that we can help you navigate during the installation process.

What are the pros and cons of geothermal energy?

Geothermal systems don’t generate heat, instead using the Earth’s natural ambient temperature for climate control. You end up saving a lot of money on monthly utility bills, and geothermal systems can also last a lot longer. If you keep up with routine maintenance, you can get 20 years from a geothermal heat pump and as much as 50+ years from an underground loop system.

Is there such a thing as geothermal air conditioning?

Yes! Geothermal heat pumps are similar to traditional central heat pumps in that they are 2-in-1 systems capable of providing both heating and cooling. Even with this potentially confusing name, geothermal heat pumps are just as effective at cooling homes in many different climates. In fact, they’re often the most efficient type of system available!

How does solar energy work?

Solar technology converts sunlight to electrical energy through either PV (photovoltaic) panels or through mirrors that concentrate solar radiation. PV is used in solar panels, which are the most common solar energy system. The energy from the sunlight is absorbed by PV cells, which stimulates the cells’ electrons and produces electrical energy. When paired with battery storage, the process can even generate backup power for use at night and during outages.

What is solar energy used for?

Solar energy can power your home, charge your car, and even power your HVAC SYSTEM!

Is my home suitable for solar panels?

It depends on a lot of factors. We can usually review your electric bill and the aerial photo of your home and let you know if your home is the right fit for solar or not.

How can I make my HVAC eco-friendly?

Geothermal is the best green alternative for HVAC. Scheduling frequent tune-ups on your HVAC systems can help extend your system’s life span, which is a big step for personal sustainability. Smart thermostats also control the daily temperature of your home and help with zoning, which reduces the impact on your systems by not having major temperature changes. High-efficiency HVAC systems are usually ENERGY STAR certified, which lowers carbon emissions by reaching high performance for less energy. Powering your HVAC with Solar is the best way to have an eco-friendly home.